.Netac NTBSD5P48SP-16 16GB DIMM System Memory, DDR5,4800MHz, 1 x 16GB, 288 Pin, 1.35v, CL40<\/b>
NTBSD5P48SP-16 is a 2G x8 1R x 64-Bit (16GB) fifth-generation double data rate (DDR5) SDRAM (Synchronous DRAM) memory module, based on eight 2G x 8-bit FBGA components per module. The SPD is programmed to JEDEC standard latency DDR5-4800
timing of 40-40-40 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:<\/p>\n
FEATURES
\u2022 VDD\/VDDQ = 1.1V Typical
\u2022 VPP = 1.8V Typical
\u2022 32 Bank with x4\/x8
\u2022 16 Bank with x16
\u2022 8 BG(Bank Group) for X4\/X8\/X16 configurations
\u2022 BL16, BC8 OTF, BL32, BL32 OTF supported
\u2022 Temperature Encoding
\u2022 Same Bank Refresh
\u2022 Hard\/Soft Post Package Repair
\u2022 Input Clock Frequency Change
\u2022 Maximum Power Saving Mode (MPSM)
\u2022 Multi-Purpose Command (MPC)
\u2022 Per DRAM Addressability (PDA)
\u2022 Connectivity Test (CT) \/ ZQ Calibration
\u2022 DFE (Decision Feedback Equalization) for DQ
\u2022 DQS Interval Oscillator
\u2022 1N \/ 2N Mode support for Commands
\u2022 On-Die ECC
\u2022 ECC Transparency and Error Scrub<\/p>\n
Memory Capacity<\/b>
16GB (1 x 16GB)<\/p>\n
Memory Type<\/b>
DDR5<\/p>\n
Module Type<\/b>
DIMM<\/p>\n
Memory Speed<\/b>
DDR5-4800MHz<\/p>\n
Pin Configuration<\/b>
288-pin<\/p>\n
Registered\/Unbuffered<\/b>
Unbuffered<\/p>\n
Error Correction<\/b>
Non-ECC<\/p>\n
CL-tRCD-tRP-tRAS<\/b>
CL 40<\/p>\n
Heat Sink<\/b>
\/<\/p>\n
Working Voltage<\/b>
1.1v<\/p>\n","protected":false},"excerpt":{"rendered":"\n